Features
|
Applications
|
The Acoustic Bay ENCL-WP-242416 19" Rack 6U Steel Fan Cooled Weatherproof NEMA Enclosure with 120VAC Power and Equipment Plate is ideal for protecting rack mountable equipment from harsh environments and tampering. Equipment designed for indoor use can now be located outside.
Construction and Features
This rugged enclosure features continuous seam welded 18 Gauge (1.2mm thick) steel construction. The enclosure door is fully gasketed making this enclosure suitable for use indoors or outdoors. The door features reinforced hinges and dual quarter-turn latches to secure the enclosure. Internal grounding studs are provided on both the door and enclosure.
Both the enclosure and door are finished in a rugged epoxy polyester textured light gray powder coat finish.
Removable Power and Fan Module
The ENCL-WP-242416 features a removable power and fan module that attaches to the bottom of the enclosure. Constructed of rugged aluminum, this can be easily removed for servicing and is fully gasketed to ensure a proper seal. This power module features two pre-wired duplex 120VAC power outlets (4 outlets total) and a pre-wired 5 foot power cord, so no additional wiring is required.
This enclosure is also available with 120VAC 20A outlets and a 5 foot power cord and with 20A 3-prong plug. See ENCL-WP-242416-R6U.
Dual Cooling Fans Ventilation
This enclosure features dual 3" vents and dual thermostat controlled cooling fans. The low noise, high airflow fans help maintain lower internal temperatures by allowing air to be either pushed or pulled through the enclosure. The fans turn on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). Both fans are wired internally so they do not require the use of the AC outlets leaving them available for internal equipment use.
This enclosure is also available with a lower fan turn-on temperature of 85°F (30°C). See ENCL-WP-242416-85.
Internal 6U 19" Equipment Rack
The ENCL-WP-242416 features a standard 19" 6U equipment rack. It is designed to accommodate a wide range of equipment such as network switches, rack mount audio/video equipment and most other rack mountable equipment. The rack frame mounts to a 18 Gauge (1.2mm thick) galvanized steel plate which can also be drilled and modified by the installer to unique site requirements.
Installation Note: This 6U rack has an adjustable depth from 9.5" (241.3mm) to 15.5" (393.7mm). Before ordering please check the dimensions of the equipment to be installed to ensure proper fit.
Cable Glands
The enclosure features two unique PG-16 cable glands with a closed inner seal. They are installed in the open ports to maintain the NEMA rating of the enclosure when not in use. When required for use, simply punch a hole through the inner membrane, run your cables and tighten for a water-tight seal.
Mounting
Mounting holes are provided inside the enclosure for mounting to a wall or other structure. Two optional flange and pole mounting kits are available, painted steel (model NMKS-600-08) and stainless steel (model NMKX-600-08).
Optional Lockable Latches
For additional protection of internal equipment installed, two lockable latches are available. The HN-0005 is a keyed lock set which includes two keys. The HN-0006 allows the enclosure to be securely locked via use of a padlock (not included). Both the HN-0005 and HN-0006 are direct replacements for the standard quarter-turn latches that come pre-installed in the enclosures.
Customization
This enclosure is one of many standard models available. Our lineup includes enclosures specifically tailored for WiFi equipment, DIN Mount Industrial Controls, POTS Telephones, IP Phones, Device Charging Stations, Security & Safety Equipment, Building & Home Automation and More.
We offer numerous standard models and options including equipment mounting plates, DIN rails, AC or DC power, air vents, cooling fans and heaters and more. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.
Material | Continuous Seam Welded 18 Gauge (1.2mm) Steel |
Color | Light Gray (RAL 7035) |
Voltage | 120VAC |
Max Load | 10A @ 120VAC |
Cooling Fans Turn-On Temperature | 100°F (38°C) ±6°F |
Cooling Fans Turn-Off Temperature | 79°F (26°C) ±9°F |
Exterior Dimensions (Height x Width x Depth) |
23.6 x 23.6 x 15.7 Inches (600 x 600 x 400 mm) |
Interior Dimensions* (Height x Width x Depth) |
18.0 x 20.0 x 14.1 Inches (457 x 508 x 358 mm) |
Rack Frame | 19" Width 6U |
Rack Frame Weight Capacity | 75 lbs (34kg) |
Equipment Plate Material | 18 Gauge (1.2mm) Zinc Coated Galvanized Steel |
Equipment Plate Dimensions | 22.2 x 21.6 In. (565 x 550 mm) |
Weight | 60.8 lbs. (27.6 kg) |
Power Cord Length | 5 Feet (1.5m) |
Ratings | NEMA Type 3R, 3RX / IP24 |
*Notes: 1) Interior dimensions represent maximum space available for equipment. |
AcousticBay
24x24x16 19" Wide 6U Rack Steel Weatherproof NEMA Enclosure with Dual Cooling Fans, Dual 120 VAC Duplex Outlets and Power Cord
- Regular price
- $849.00
Features
|
Applications
|
The Acoustic Bay ENCL-WP-242416 19" Rack 6U Steel Fan Cooled Weatherproof NEMA Enclosure with 120VAC Power and Equipment Plate is ideal for protecting rack mountable equipment from harsh environments and tampering. Equipment designed for indoor use can now be located outside.
Construction and Features
This rugged enclosure features continuous seam welded 18 Gauge (1.2mm thick) steel construction. The enclosure door is fully gasketed making this enclosure suitable for use indoors or outdoors. The door features reinforced hinges and dual quarter-turn latches to secure the enclosure. Internal grounding studs are provided on both the door and enclosure.
Both the enclosure and door are finished in a rugged epoxy polyester textured light gray powder coat finish.
Removable Power and Fan Module
The ENCL-WP-242416 features a removable power and fan module that attaches to the bottom of the enclosure. Constructed of rugged aluminum, this can be easily removed for servicing and is fully gasketed to ensure a proper seal. This power module features two pre-wired duplex 120VAC power outlets (4 outlets total) and a pre-wired 5 foot power cord, so no additional wiring is required.
This enclosure is also available with 120VAC 20A outlets and a 5 foot power cord and with 20A 3-prong plug. See ENCL-WP-242416-R6U.
Dual Cooling Fans Ventilation
This enclosure features dual 3" vents and dual thermostat controlled cooling fans. The low noise, high airflow fans help maintain lower internal temperatures by allowing air to be either pushed or pulled through the enclosure. The fans turn on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). Both fans are wired internally so they do not require the use of the AC outlets leaving them available for internal equipment use.
This enclosure is also available with a lower fan turn-on temperature of 85°F (30°C). See ENCL-WP-242416-85.
Internal 6U 19" Equipment Rack
The ENCL-WP-242416 features a standard 19" 6U equipment rack. It is designed to accommodate a wide range of equipment such as network switches, rack mount audio/video equipment and most other rack mountable equipment. The rack frame mounts to a 18 Gauge (1.2mm thick) galvanized steel plate which can also be drilled and modified by the installer to unique site requirements.
Installation Note: This 6U rack has an adjustable depth from 9.5" (241.3mm) to 15.5" (393.7mm). Before ordering please check the dimensions of the equipment to be installed to ensure proper fit.
Cable Glands
The enclosure features two unique PG-16 cable glands with a closed inner seal. They are installed in the open ports to maintain the NEMA rating of the enclosure when not in use. When required for use, simply punch a hole through the inner membrane, run your cables and tighten for a water-tight seal.
Mounting
Mounting holes are provided inside the enclosure for mounting to a wall or other structure. Two optional flange and pole mounting kits are available, painted steel (model NMKS-600-08) and stainless steel (model NMKX-600-08).
Optional Lockable Latches
For additional protection of internal equipment installed, two lockable latches are available. The HN-0005 is a keyed lock set which includes two keys. The HN-0006 allows the enclosure to be securely locked via use of a padlock (not included). Both the HN-0005 and HN-0006 are direct replacements for the standard quarter-turn latches that come pre-installed in the enclosures.
Customization
This enclosure is one of many standard models available. Our lineup includes enclosures specifically tailored for WiFi equipment, DIN Mount Industrial Controls, POTS Telephones, IP Phones, Device Charging Stations, Security & Safety Equipment, Building & Home Automation and More.
We offer numerous standard models and options including equipment mounting plates, DIN rails, AC or DC power, air vents, cooling fans and heaters and more. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.
Material | Continuous Seam Welded 18 Gauge (1.2mm) Steel |
Color | Light Gray (RAL 7035) |
Voltage | 120VAC |
Max Load | 10A @ 120VAC |
Cooling Fans Turn-On Temperature | 100°F (38°C) ±6°F |
Cooling Fans Turn-Off Temperature | 79°F (26°C) ±9°F |
Exterior Dimensions (Height x Width x Depth) |
23.6 x 23.6 x 15.7 Inches (600 x 600 x 400 mm) |
Interior Dimensions* (Height x Width x Depth) |
18.0 x 20.0 x 14.1 Inches (457 x 508 x 358 mm) |
Rack Frame | 19" Width 6U |
Rack Frame Weight Capacity | 75 lbs (34kg) |
Equipment Plate Material | 18 Gauge (1.2mm) Zinc Coated Galvanized Steel |
Equipment Plate Dimensions | 22.2 x 21.6 In. (565 x 550 mm) |
Weight | 60.8 lbs. (27.6 kg) |
Power Cord Length | 5 Feet (1.5m) |
Ratings | NEMA Type 3R, 3RX / IP24 |
*Notes: 1) Interior dimensions represent maximum space available for equipment. |
- Regular price
- $849.00
Frequently Bought Together
-
Vendor: AcousticBay
24x24x24 120VAC 20A Steel NEMA Enclosure for UPS Power Systems with 19" Wide 6U Rack, Dual Cooling Fans, 20A Power Outlets & Power Cord
Regular price $1,139.99 -
Vendor: AcousticBay
24x24x24 120VAC 20A Steel NEMA Enclosure for UPS Power Systems with Heavy Duty 19" Wide Adjustable 8U Rack Frame, Dual Cooling Fans, 20A Power Outlets & Power Cord
Regular price $1,209.99 -
Vendor: AcousticBay
24x24x24 19" Wide 6U Rack Steel Weatherproof NEMA Enclosure with Dual Cooling Fans, Single 120 VAC Duplex Outlet and Power Cord
Regular price $1,079.99 -
Vendor: AcousticBay
24x24x24 NEMA 4X Steel Weatherproof Enclosure with Steel Equipment Mounting Plate
Regular price $539.99